Welding Products
Rubber Welding Cables - Copper Conductor
This cable is manufactured as per BIS specification and are ISI marked. Conductor is wire bar copper. Separated from outer with high quality current resistant plyster tape. Available in HOFR (Heat Oil & Flame Regardant) Rubber with Maximum rated operating temperature of conductor is 90° cencius. Tensile strenth of minimum 8.0 N/mm2 and minimum elongation at break point of 250%. TRS (Toght Rubber Sheathing) natural rubber with maximum rated operation temperature of conductor is 60° Censius. Tenisle strength of 7.0N/mm2 and minimum elongation at break point of 300%.
Technical Data for Welding Cables with Copper Conductor
| Nominal Area | Nominal No. of wires Max. Dia | Appx. Cond. Dia | Insulation thickness | Max. C.R. at 20°c | Current Rating for 30% Duty Cycle | |
|---|---|---|---|---|---|---|
| mm | mm | mm | ohm/ km | TSR Amp | HDFR Amp | |
| 16mm2 | 510/0.21 | 5.7 | 2 | 1.21 | 172 | 246 |
| 25mm2 | 793/0.21 | 7.37 | 2.1 | 0.78 | 228 | 343 |
| 35mm2 | 500/0.31 | 8.71 | 2.2 | 0.554 | 285 | 403 |
| 50mm2 | 707/0.31 | 10.4 | 2.4 | 0.386 | 360 | 509 |
| 70mm2 | 999/0.31 | 12.4 | 2.6 | 0.272 | 453 | 643 |
| 95mm2 | 1344/0.31 | 14.5 | 3 | 0.206 | 546 | 774 |
Any Query? Just drop us a line and we will get back to you very soon.
Contact Us
© 2023 gecabweld.com. Safety Products.